{"title":"E-Ride Pro SR Forks and Rear Shocks","description":"\u003cp\u003eSuspension for the E-Ride Pro SR: the Sirris F43 CMX fork for E-Ride Pro SR, EXT Ferro E-MX, TECH E39, RFloXa Hawk 35 Max, RFloXa RAB50RC and RAB53RV shocks, KKE shock springs and FastAce take-off rear shocks.\u003c\/p\u003e","products":[{"product_id":"ext-ferro-e-mx-fork-surron-talaria-eride-pro-79-bike-segway","title":"EXT Ferro E-MX Fork Surron, Talaria, E-Ride Pro, 79Bike, Segway","description":"\u003cp\u003eThe \u003cstrong\u003eEXT Ferro E-MX Fork\u003c\/strong\u003e is the gold standard in light e-moto suspension — a purpose-built, inverted USD fork engineered for the demands of off-road electric riding. Available in \u003cstrong\u003eFlat Crown\u003c\/strong\u003e and \u003cstrong\u003eDrop Crown\u003c\/strong\u003e configurations to suit your geometry preference.\u003c\/p\u003e\n\n\u003ch3\u003eCore Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRobust dual crown inverted MX design (USD)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36mm Ø hard chromed steel stanchions\u003c\/strong\u003e (heat treated 42CrMo4) with Superfinish surface treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHS3 3-way positive air system\u003c\/strong\u003e + 1 large negative self-balancing air chamber for optimum support through all travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-flow 3-way cartridge damper\u003c\/strong\u003e with independent high \u0026amp; low speed compression plus rebound damping adjustment\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuperfinish inner tube coating\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal pressure air release system\u003c\/strong\u003e on both legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin hexagonal floating axle\u003c\/strong\u003e, boost compatible Ø20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir spring and cartridge radial guide system\u003c\/strong\u003e with bespoke aeronautical seals (minimize friction on side loads)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge piston design\u003c\/strong\u003e for best damping control and separate IFP\/coil energized compression valve\u003c\/li\u003e\n\u003cli\u003eNo cavitation and low hysteresis\u003c\/li\u003e\n\u003cli\u003eSelf-hydraulic cartridge bleeding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Mobile Sliding DU guiding system\u003c\/strong\u003e with super-long static overlap (CGB Continuously Guided Bushing system for maximum guidance and torsional rigidity)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e205mm of travel\u003c\/strong\u003e and 44mm offset\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e200mm post mount brake\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight: 4,000g\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePressure release one-way valves on both legs\u003c\/li\u003e\n\u003cli\u003eCompatible with stock fender design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoost Hub Spacing\u003c\/strong\u003e for flexibility with aftermarket wheel sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong style=\"color: #ff2a00;\"\u003eNOTICE:\u003c\/strong\u003e \u003cspan style=\"color: #ff2a00;\"\u003eIf you are running a \u003cu\u003estock wheel\u003c\/u\u003e or a wheel not specifically designed for BOOST hubs, you will need to install a rotor adaptor — available \u003ca href=\"https:\/\/titaniumsurron.com\/products\/front-wheel-boost-spacer\" title=\"Warp9 boost hub adaptor\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePLEASE INCLUDE IN THE ORDER NOTES: RIDER WEIGHT\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote: For Surron builds not on the most current model year, a head tube reinforcement clamp is recommended. Contact us for availability.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eBike Compatibility\u003c\/h3\u003e\n\n\u003ctable width=\"427\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"111\"\u003e\n\u003ccol width=\"64\"\u003e\n\u003ccol width=\"110\"\u003e\n\u003ccol width=\"142\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDirect Fit?\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurron\u003c\/td\u003e\n\u003ctd\u003eLBX\/S\u003c\/td\u003e\n\u003ctd\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd\u003eAll model years compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003eTalaria\u003c\/td\u003e\n\u003ctd\u003eMX3\/4\u003c\/td\u003e\n\u003ctd rowspan=\"2\"\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd rowspan=\"2\"\u003eRecommend Drop Crown for MX versions, Flat for X3 \/ X3 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX3 \/ X3 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003eE-Ride Pro\u003c\/td\u003e\n\u003ctd\u003eS\/2.0\u003c\/td\u003e\n\u003ctd\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.0\u003c\/td\u003e\n\u003ctd\u003eYes, with EXT Brake Adaptor\n\u003c\/td\u003e\n\u003ctd\u003eFits SR model but not covered under warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVentus One\/One+\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e79Bike\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRawrr\u003c\/td\u003e\n\u003ctd\u003eMantis \u0026amp; Mantis X\u003c\/td\u003e\n\u003ctd\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZero\u003c\/td\u003e\n\u003ctd\u003eXB\u003c\/td\u003e\n\u003ctd\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRerode\u003c\/td\u003e\n\u003ctd\u003eR1 \u0026amp; Ewatt 2.0\u003c\/td\u003e\n\u003ctd\u003eYes w\/ Boost Rotor Spacer\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAltis Sigma\u003c\/td\u003e\n\u003ctd\u003eSigma MX 100\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"EXT","offers":[{"title":"Flat crown \/ Surron LBX - Segway X-260","offer_id":41988971724911,"sku":"","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ Eride Pro SS 2.0 - Pro S","offer_id":43071530467439,"sku":null,"price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ E-Ride Pro SS 3.0 - SR (Includes additional brake adaptor)","offer_id":43071530500207,"sku":null,"price":1629.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ Talaria MX3 - MX4","offer_id":43071530532975,"sku":null,"price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ Talaria XXX \/ X3 Pro","offer_id":43071530598511,"sku":null,"price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ Ventus One - One+","offer_id":43071530631279,"sku":null,"price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ RAWRR Mantis - Mantis X","offer_id":43071530664047,"sku":null,"price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ Zero","offer_id":43071530696815,"sku":null,"price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Flat crown \/ Rerode R1","offer_id":43071530729583,"sku":null,"price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/ext-ferro-e-mx-fork-surron-talaria-eride-pro-79-bike-segway-533823.webp?v=1723415285"},{"product_id":"ebmx-rear-shock-for-e-ride-pro","title":"EBMX Rear Shock for E-Ride Pro","description":"\u003cp\u003eSo, you've tried every mountain bike shock under the sun and they just aren't cutting it, why is that? \u003c\/p\u003e\n\u003cp\u003eOur EBMX \/ YSS collaboration shock has been tuned specifically for the E-Ride Pro kinematics by the best in the business.\u003c\/p\u003e\n\u003cp\u003eThe fact is, it's all in the oil..... the physical size of a shock and how much oil it holds matters! As soon as things get hot, oil changes viscosity and cavitation occurs, this has a dramatic effect on both compression and rebound. \u003c\/p\u003e\n\u003cp\u003eThe bigger the shock the better the performance, especially if you ride hard for long periods, but quality dampening and spring rates matter too, that's why we went to the people at YSS. With EBMX driving the requirements we believe YSS have developed the best performing shock you can match to your E-Ride Pro.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Key Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh speed and low speed compression damping.\u003c\/li\u003e\n\u003cli\u003eRebound adjustment clicker.\u003c\/li\u003e\n\u003cli\u003eMultiple spring weight options (see table below)\u003c\/li\u003e\n\u003cli\u003eDesigned for a motorbike, not a mountain bike.\u003c\/li\u003e\n\u003cli\u003eHuge oil reservoir keeps the shock cool even under hard riding\u003c\/li\u003e\n\u003cli\u003eIncreased leverage ratio for more bottom out support\u003c\/li\u003e\n\u003cli\u003eExtremely strong and good for jumping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eEBMX Shock Spring Sizing Chart\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eCaution, the ERide linkage is not very progressive and leverages a softer spring rate than most other bikes, be careful not to go any stiffer than this chart recommends.\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-o-color-2\"\u003e\u003cspan class=\"text-o-color-1\"\u003e\u003cb\u003eRider Weight\u003cu\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"bg-o-color-2\"\u003e\n\u003cp\u003e\u003cspan class=\"text-o-color-1\"\u003e\u003cb\u003eSwing Arm\u003cu\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd class=\"bg-o-color-2\"\u003e\n\u003cp\u003e\u003cspan class=\"text-o-color-1\"\u003e\u003cb\u003eSuggested Spring Weight (N\/mm)\u003cu\u003e\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e140-165 lb\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eStock\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e70-80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e165-190 lb\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eStock\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e190-210 lb\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eStock\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOver 210 lb\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eStock\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100-115\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSpring weight suggestions above are based on trail riding not extreme riding or jumping. If you plan to ride trails with large drops or do large jumps, consider going up size by 1 or 2 spring weights.\u003c\/p\u003e","brand":"Charged Powersports","offers":[{"title":"70","offer_id":42985274966127,"sku":"E-MU-AC14-XX-70","price":989.0,"currency_code":"USD","in_stock":false},{"title":"80","offer_id":42985274998895,"sku":"E-MU-AC14-XX-80","price":989.0,"currency_code":"USD","in_stock":false},{"title":"100","offer_id":42985275031663,"sku":"E-MU-AC14-XX-100","price":989.0,"currency_code":"USD","in_stock":false},{"title":"115","offer_id":42985275064431,"sku":"E-MU-AC14-XX-115","price":989.0,"currency_code":"USD","in_stock":false},{"title":"125","offer_id":42985275097199,"sku":"E-MU-AC14-XX-125","price":989.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/ebmx-rear-shock-for-e-ride-pro-6057677.png?v=1775016666"},{"product_id":"fastace-rear-shock-bda53rc","title":"FastAce Rear Shock - New Take Off","description":"\u003cp\u003eBrand new FastAce rear shocks with upgraded springs which work great to upgrade your 450lb KKE or DNM shock with something that is not only stiffer sprung but also better hydraulic valving to control your rear suspension better.  Out of all the rear OEM shocks that have come on the Talaria and Surron, the FastAce has consistently been the best option.\u003c\/p\u003e\n\u003cp\u003eFitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurron LBX\u003c\/li\u003e\n\u003cli\u003eSurron LBS\u003c\/li\u003e\n\u003cli\u003eE-Ride Pro S\u003c\/li\u003e\n\u003cli\u003eE-Ride Pro 2.0, 3.0\u003c\/li\u003e\n\u003cli\u003eE-Ride Pro SR\u003c\/li\u003e\n\u003cli\u003eTalaria MX3\u003c\/li\u003e\n\u003cli\u003eTalaria MX4\u003c\/li\u003e\n\u003cli\u003eTalaria MX5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAvailable in 3 different spring rates (OEM uses 450 lb)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e500 lb recommended above 150 lbs\u003c\/li\u003e\n\u003cli\u003e550 lb recommended above 175 lbs\u003c\/li\u003e\n\u003cli\u003e600 lb recommended above 200 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Settings advice, the higher the spring rate the MORE you need to turn up your rebound adjuster to control the extra spring rebound.\u003c\/p\u003e","brand":"Charged Powersports","offers":[{"title":"500lb","offer_id":42985284763759,"sku":"BDA53RC-500","price":159.0,"currency_code":"USD","in_stock":false},{"title":"550lb","offer_id":42985284796527,"sku":"BDA53RC-550","price":159.0,"currency_code":"USD","in_stock":false},{"title":"600lb","offer_id":42985284829295,"sku":"BDA53RC-600","price":159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/fastace-rear-shock-new-take-off-bda53rc-7520955.png?v=1785670147"},{"product_id":"tech-e39-e-moto-fork","title":"TECH E39 E-Moto Fork","description":"\u003cp\u003eThe TECH Suspension E39 e-moto fork is engineered to enhance the performance of lightweight E-Motos.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMOTORCYCLE DESIGN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e39mm stanchions and an upside-down, dual-crown design provide support and precise steering without flexing under heavy impacts.\u003c\/li\u003e\n\u003cli\u003eDual coil springs and hydraulic dampers designed and tuned for the weight and speed of lightweight E-Motos.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePERFORMANCE \u0026amp; ADJUSTABILITY\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e230mm travel with easy-to-use high\/low-speed compression and rebound adjustments.\u003c\/li\u003e\n\u003cli\u003eFactory-tuned for average weight riders of 60-80kgs and all-round riding using a medium spring rate.\u003c\/li\u003e\n\u003cli\u003eFive different spring combinations are available to cater for all rider weights and types of riding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes triple clamps, axle, and wheel spacer for direct installation on all lightweight E-Moto brands*.\u003c\/li\u003e\n\u003cli\u003eStandard drop crown supports 21″ wheels; flat crown option available for 19″ wheels.\u003c\/li\u003e\n\u003cli\u003ePM caliper mount supports 220mm brake discs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDURABILITY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized aluminum outer tubes and hard-chrome-treated steel stanchions resist wear in demanding conditions.\u003c\/li\u003e\n\u003cli\u003eLow-friction bushings, heavy-duty seals, and premium oil ensure consistent performance.\u003c\/li\u003e\n\u003cli\u003ePlastic fork guards included for stanchion protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e\u003cstrong\u003e*This fork ships with a 30mm drop crown as the stock option\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pinned Electric","offers":[{"title":"Default Title","offer_id":43602329567343,"sku":"sku-49912339005725","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/tech-e39-e-moto-fork-5635084.png?v=1787748071"},{"product_id":"rfloxa-hawk35-max","title":"RFloXa Hawk35 Max","description":"\u003ch3 data-end=\"147\" data-start=\"128\"\u003eAbout this item\u003c\/h3\u003e\n\u003cp data-end=\"486\" data-start=\"149\"\u003e\u003cstrong data-end=\"178\" data-start=\"149\"\u003e① Ready-to-Install Design\u003c\/strong\u003e – This premium fork comes \u003cstrong data-end=\"248\" data-start=\"205\"\u003epreloaded with a bearing kit by default\u003c\/strong\u003e, allowing direct installation with no extra parts required—specifically designed to match the \u003cstrong data-end=\"366\" data-start=\"343\"\u003eE-Ride Pro 3.0 \/ SR\u003c\/strong\u003e platform. If you require the fork \u003cstrong data-end=\"440\" data-start=\"401\"\u003ewithout the bearing kit pre-pressed\u003c\/strong\u003e, simply leave a note when placing your order.\u003c\/p\u003e\n\u003cp data-end=\"745\" data-start=\"488\"\u003e\u003cstrong data-end=\"518\" data-start=\"488\"\u003e② Tailored Fitment Options\u003c\/strong\u003e – Built to the geometry of the \u003cstrong data-end=\"573\" data-start=\"550\"\u003eE-Ride Pro 3.0 \/ SR\u003c\/strong\u003e, this fork ensures a precise fit. The standard \u003cstrong data-end=\"650\" data-start=\"621\"\u003edrop crown color is black\u003c\/strong\u003e. If you would like a different crown color, please include a note with your order at checkout.\u003c\/p\u003e\n\u003cp data-end=\"844\" data-start=\"747\"\u003e\u003cstrong data-end=\"782\" data-start=\"747\"\u003e③ Spring Weight Recommendations\u003c\/strong\u003e\u003cbr data-end=\"785\" data-start=\"782\"\u003e\u003cem data-end=\"808\" data-start=\"785\"\u003eFor 203mm Travel Fork\u003c\/em\u003e (compatible with 19\"\/21\" wheels):\u003c\/p\u003e\n\u003cul data-end=\"968\" data-start=\"845\"\u003e\n\u003cli data-end=\"870\" data-start=\"845\"\u003e\n\u003cp data-end=\"870\" data-start=\"847\"\u003e45lbs spring – ≤100kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"925\" data-start=\"871\"\u003e\n\u003cp data-end=\"925\" data-start=\"873\"\u003e60lbs spring – 100–130kg (ideal for heavy jumping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"968\" data-start=\"926\"\u003e\n\u003cp data-end=\"968\" data-start=\"928\"\u003e45–60lbs progressive spring – 80–130kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1029\" data-start=\"970\"\u003e\u003cem data-end=\"993\" data-start=\"970\"\u003eFor 228mm Travel Fork\u003c\/em\u003e (compatible with 19\"\/21\" wheels):\u003c\/p\u003e\n\u003cul data-end=\"1084\" data-start=\"1030\"\u003e\n\u003cli data-end=\"1055\" data-start=\"1030\"\u003e\n\u003cp data-end=\"1055\" data-start=\"1032\"\u003e45lbs spring – ≤100kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1084\" data-start=\"1056\"\u003e\n\u003cp data-end=\"1084\" data-start=\"1058\"\u003e55lbs spring – 100–130kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1403\" data-start=\"1086\"\u003e\u003cstrong data-end=\"1121\" data-start=\"1086\"\u003e④ Performance Suspension System\u003c\/strong\u003e – Featuring a \u003cstrong data-end=\"1191\" data-start=\"1136\"\u003ehigh-performance inverted oil-spring damping system\u003c\/strong\u003e, this fork offers multi-stage adjustability for \u003cstrong data-end=\"1266\" data-start=\"1240\"\u003ehigh-speed compression\u003c\/strong\u003e, \u003cstrong data-end=\"1293\" data-start=\"1268\"\u003elow-speed compression\u003c\/strong\u003e, \u003cstrong data-end=\"1306\" data-start=\"1295\"\u003erebound\u003c\/strong\u003e, and \u003cstrong data-end=\"1330\" data-start=\"1312\"\u003espring preload\u003c\/strong\u003e, ensuring optimal tuning across various riding styles and terrain types.\u003c\/p\u003e\n\u003cp data-end=\"1665\" data-start=\"1405\"\u003e\u003cstrong data-end=\"1431\" data-start=\"1405\"\u003e⑤ Built for Durability\u003c\/strong\u003e – The fork uses \u003cstrong data-end=\"1483\" data-start=\"1448\"\u003eAL6061-T6 forged aluminum alloy\u003c\/strong\u003e for the bottom brackets and \u003cstrong data-end=\"1534\" data-start=\"1512\"\u003eAL7075-T6 aluminum\u003c\/strong\u003e for the tubes. The spring wire is made from \u003cstrong data-end=\"1589\" data-start=\"1579\"\u003e55CRSI\u003c\/strong\u003e, engineered for longevity and performance in demanding off-road conditions.\u003c\/p\u003e\n\u003chr data-end=\"1670\" data-start=\"1667\"\u003e\n\u003ch3 data-end=\"1685\" data-start=\"1672\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-end=\"2174\" data-start=\"1686\"\u003e\n\u003cli data-end=\"1720\" data-start=\"1686\"\u003e\n\u003cp data-end=\"1720\" data-start=\"1688\"\u003e\u003cstrong data-end=\"1708\" data-start=\"1688\"\u003eCenter Distance:\u003c\/strong\u003e 750–800mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1758\" data-start=\"1721\"\u003e\n\u003cp data-end=\"1758\" data-start=\"1723\"\u003e\u003cstrong data-end=\"1746\" data-start=\"1723\"\u003eMain Piston Travel:\u003c\/strong\u003e 203–228mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1787\" data-start=\"1759\"\u003e\n\u003cp data-end=\"1787\" data-start=\"1761\"\u003e\u003cstrong data-end=\"1779\" data-start=\"1761\"\u003eTube Diameter:\u003c\/strong\u003e ∅37mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1825\" data-start=\"1788\"\u003e\n\u003cp data-end=\"1825\" data-start=\"1790\"\u003e\u003cstrong data-end=\"1816\" data-start=\"1790\"\u003eCaliper Mount Spacing:\u003c\/strong\u003e 99.5mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1871\" data-start=\"1826\"\u003e\n\u003cp data-end=\"1871\" data-start=\"1828\"\u003e\u003cstrong data-end=\"1848\" data-start=\"1828\"\u003eDisc Brake Size:\u003c\/strong\u003e ∅220mm (Upgradeable)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1915\" data-start=\"1872\"\u003e\n\u003cp data-end=\"1915\" data-start=\"1874\"\u003e\u003cstrong data-end=\"1893\" data-start=\"1874\"\u003eDamping System:\u003c\/strong\u003e Inverted Oil-Spring\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2019\" data-start=\"1916\"\u003e\n\u003cp data-end=\"2019\" data-start=\"1918\"\u003e\u003cstrong data-end=\"1934\" data-start=\"1918\"\u003eAdjustments:\u003c\/strong\u003e Multi-stage High-Speed Compression, Low-Speed Compression, Rebound, Spring Preload\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2101\" data-start=\"2020\"\u003e\n\u003cp data-end=\"2101\" data-start=\"2022\"\u003e\u003cstrong data-end=\"2036\" data-start=\"2022\"\u003eMaterials:\u003c\/strong\u003e AL6061-T6 Forged Aluminum (Bottom), AL7075-T6 Aluminum (Tubes)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2129\" data-start=\"2102\"\u003e\n\u003cp data-end=\"2129\" data-start=\"2104\"\u003e\u003cstrong data-end=\"2120\" data-start=\"2104\"\u003eSpring Wire:\u003c\/strong\u003e 55CRSI\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2174\" data-start=\"2130\"\u003e\n\u003cp data-end=\"2174\" data-start=\"2132\"\u003e\u003cstrong data-end=\"2149\" data-start=\"2132\"\u003eTriple Clamp:\u003c\/strong\u003e CNC Precision Machined \u003c\/p\u003e\n\u003chr data-end=\"2179\" data-start=\"2176\"\u003e\n\u003ch3 data-end=\"2193\" data-start=\"2181\"\u003eFitment:\u003c\/h3\u003e\n\u003cul data-end=\"2215\" data-start=\"2194\"\u003e\n\u003cli data-end=\"2215\" data-start=\"2194\"\u003e\n\u003cp data-end=\"2215\" data-start=\"2196\"\u003eE-Ride Pro 3.0 \/ SR\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pinned Electric","offers":[{"title":"45lbs 228mm travel 800mm Length","offer_id":43602328911983,"sku":"sku-50099498909981","price":1109.99,"currency_code":"USD","in_stock":false},{"title":"55lbs 228mm travel 800mm Length","offer_id":43602328944751,"sku":"sku-50099498942749","price":1109.99,"currency_code":"USD","in_stock":false},{"title":"60lb 203mm Travel 750mm Length","offer_id":43602328977519,"sku":"sku-50099498975517","price":1065.99,"currency_code":"USD","in_stock":false},{"title":"45-60lbs 203mm Travel 750mm Length","offer_id":43611612020847,"sku":"sku-50358825287965","price":1109.99,"currency_code":"USD","in_stock":false},{"title":"45lb 203mm Travel 750mm Length","offer_id":54012667592815,"sku":"sku-52749731692829","price":1065.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/rfloxa-hawk35-max-e-ride-pro-sr-and-pro-ss-30-1135551.webp?v=1757846672"},{"product_id":"rfloxa-rab50rc","title":"RFloXa RAB50RC","description":"\u003cp\u003e\u003cstrong\u003eAbout this item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: The spring preload is recommended to be around 10mm; excessive preload will lead to spring deformation, resulting in the spring side wear phenomenon.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e①\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdvanced Technology\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The RAB50RC rear shock absorber features an oil-gas separation damping structure with an external nitrogen reservoir, providing exceptional shock absorption. Enjoy the smoothest rides, even on the roughest terrains.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e②\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eVersatile Use\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- This high-performance rear shock absorber is perfect for tackling various challenging road conditions and is ideal for E-BIKES, bicycles, and off-road electric bikes. Multiple specifications are available, and if your bike’s requirements are not listed, feel free to contact us for customization.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e③\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUnmatched Durability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Constructed from aerospace-grade AL6061-T6 aluminum alloy, the RAB50RC is designed to resist oxidation and enhance strength. It’s robust enough to handle all the demanding maneuvers you aspire to perform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e④\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eComprehensive Adjustability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The rear suspension is equipped with rebound and compression damping adjustment knobs, allowing you to fine-tune your ride based on personal preferences. The spring hardness is adjustable via the toothed disk at the top of the spring—turn it down for a firmer feel or up for a softer response. Inflate the cylinder gas through the bottom valve for additional customization.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⑤\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReliable Warranty\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- We offer a one-year warranty service. Should any quality issues arise, please contact us for a replacement. We have full confidence in the RAB50RC’s performance, making it a highly cost-effective rear suspension option. Ensure to measure your bike’s rear suspension requirements accurately and select the appropriate size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal Nitrogen Reservoir\u003c\/li\u003e\n\u003cli\u003eOil-Gas Separation Damping Structure\u003c\/li\u003e\n\u003cli\u003eMulti-stage Rebound Damping Adjustment\u003c\/li\u003e\n\u003cli\u003eMulti-stage Compression Damping Adjustment\u003c\/li\u003e\n\u003cli\u003eAL6061-T6 Forged Upper Mount\u003c\/li\u003e\n\u003cli\u003eAL6061-T6 Aluminum Alloy Main Tube\u003c\/li\u003e\n\u003cli\u003e42CRMO Main Shaft\u003c\/li\u003e\n\u003cli\u003e55CRSI Spring Wire\u003c\/li\u003e\n\u003cli\u003eC-ring Retainer Spring Base for Stability During Riding\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove Spring Design\u003c\/li\u003e\n\u003cli\u003eFine and Smooth Rebound and Compression Damping Adjustment, with noticeable feedback at each stage\u003c\/li\u003e\n\u003cli\u003eRubber Bladder in the Air Chamber for Reduced Heat Fading of Damping and Enhanced Shock Absorption for Small Bumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Bike:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTalaria MX3 \/ MX4 \/ X3 \/ X3 Pro \/ MX5\u003c\/li\u003e\n\u003cli\u003eAltis Sigma\u003c\/li\u003e\n\u003cli\u003eE-Ride Pro S \/ 1.0\/2.0\/3.0  SR\u003c\/li\u003e\n\u003cli\u003eSurron LBX, LBS, L1E\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSegway X-260 \/ X-160\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRawrr Mantis\u003c\/li\u003e\n\u003cli\u003e79Bike Falcon M\u003c\/li\u003e\n\u003cli\u003eVentus One\u003c\/li\u003e\n\u003cli\u003eRFN Apollo\u003c\/li\u003e\n\u003cli\u003eRerode R1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pinned Electric","offers":[{"title":"450 lb | 265mm","offer_id":43602330058863,"sku":"sku-49922619932957","price":150.0,"currency_code":"USD","in_stock":true},{"title":"550 lb | 265mm","offer_id":43602330091631,"sku":"sku-49922619965725","price":150.0,"currency_code":"USD","in_stock":true},{"title":"600lb \/ 265 mm","offer_id":54079794937967,"sku":"sku-52792981586205","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/rfloxa-rab50rc-9979485.webp?v=1757846675"},{"product_id":"sirris-f43-cmx-tune-front-fork-for-e-ride-pro-sr","title":"Sirris F43 CMX Front Fork for E-Ride Pro SR","description":"\u003ch2\u003e\u003cb\u003eSIRRIS F43 CMX TUNE\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0539\/3347\/3987\/files\/slide-2048x1024-forks-homepage-banner-220-eridepro-sr_410b62c4-59c9-48cf-8d8c-671738eb03b7_jpg.webp?v=1757720739\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv class=\"rte lightly-spaced-row large-text\"\u003e\n\u003ch4\u003eRIDE IT ONCE.\u003cbr\u003eREGRET EVERYTHING ELSE.\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003ch2 class=\"majortitle in-content h1\"\u003eF43 CMX\u003c\/h2\u003e\n\u003cdiv class=\"rte lightly-spaced-row large-text\"\u003e\n\u003ch4\u003eTHE WORLD’S BEST COMPACT\u003cbr\u003eE-MOTO FORK. PERIOD.\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rte lightly-spaced-row large-text\"\u003e\n\u003cp\u003eAn oversized, race-built F43 chassis paired with our CMX-tuned closed cartridge damper — built for elite control, razor-sharp handling, and unreal front-end confidence. This is the strongest, most durable, highest performance fork available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou need to ride it to believe it.\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003eIt’s that good.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBIKE FITMENT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eE-Ride Pro SR\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eNote: This fork also fits the E-Ride Pro 3.0, it will feel quite a bit Stiffer on the 3.0 due to having heavier spring rates for a heavier weight bike.\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eSPRING RATE CHART:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSirris offers two weight ranges when selecting your CMX Tune F43 fork for E-Ride Pro SR. (\u003ci\u003eListed weight ranges are rider weight without riding gear on. 15 pounds of riding gear is calculated into the weight ranges)\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e140 lbs - 180 lbs  (Medium = 4.0\/4.0 springs)\u003cbr\u003e180 lbs - 220 lbs  (Heavy = 4.4\/4.0 springs)\u003cbr\u003e\u003cem\u003eFork spring rates listed above are left side\/right side.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003eInstallation Guide:\u003c\/em\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/-u-9xzAYF7U?si=No-OXpvBlCNKso8i\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTOOL-FREE COMPRESSION ADJUSTERS\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNEW FOR CMX — Allows for quick compression adjust without a screwdriver.\u003cbr\u003eEnjoy nearly 30 clicks of quick external adjustability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0539\/3347\/3987\/files\/Screenshot_2025-08-01_at_9.32.43_AM.png?v=1754062510\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDIRECT MOUNT STEM\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDM READY — New CMX fork is designed with a Direct Mount (DM) setup, so the stem you’re already using will bolt right up—no hassle, no extra parts.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0539\/3347\/3987\/files\/Screenshot_2025-08-01_at_9.33.02_AM.png?v=1754062534\" alt=\"\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDROP CLAMP OPTION\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBIG WHEEL OPTIONAL — Allows for fitment of 21” wheel by raising the front end an additional 25mm while retaining 220mm travel. (Raising the front end maintains balance of the bike if paired with a longer shock that raises the rear)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0539\/3347\/3987\/files\/Screenshot_2025-08-01_at_9.33.16_AM.png?v=1754062549\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNEW AXLE \u0026amp; BRAKE MOUNTS\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eULTRA STIFF AND CONFIGURABLE — Axle and drop out assembly promotes front end feel and steering precision. Replaceable caliper mount brackets allow for caliper upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0539\/3347\/3987\/files\/Screenshot_2025-08-01_at_9.33.30_AM.png?v=1754062566\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFORK SPECS:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eArchitecture\u003c\/b\u003e\u003cbr\u003eUpside down fork\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTravel\u003c\/b\u003e\u003cbr\u003e220 mm\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFree length\u003c\/b\u003e\u003cbr\u003e775 mm\u003cbr\u003e(drop clamp option adds another 25mm of extended length)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFork Spacing\u003c\/b\u003e\u003cbr\u003e178 mm - allows for unlimited tire choice (dirt or street)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFork weight\u003c\/b\u003e\u003cbr\u003e4 kg per leg (driven by sturdy construction required for the forces and speeds encountered when pushing these bikes to their limits without compromising performance)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStanchions\u003c\/b\u003e\u003cbr\u003eØ43, high tensile steel with hard chrome\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOuter tubes\u003c\/b\u003e\u003cbr\u003eSeamless 7050 aluminum, type 3 hard anodized coating\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDrop outs\u003c\/b\u003e\u003cbr\u003e6061 aluminum, type 2 anodized coating\u003cbr\u003eReplaceable caliper mount brackets allow for caliper and wheel upgrades\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAxle\u003c\/b\u003e\u003cbr\u003eUltra-high tensile hard chromed axle increases steering precision and confidence\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTriple clamps\u003c\/b\u003e\u003cbr\u003eBillet 6061 aluminum, type 2 anodized coating\u003cbr\u003eOptional drop clamp allows for 21” front wheel conversion\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSteer tube\u003c\/b\u003e \u003cbr\u003eSeamless 7050 aluminum, type 2 anodized coating\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDamping\u003c\/b\u003e\u003cbr\u003eSymmetrical, adjustable closed cartridge with spring backed modified IFP\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDamper bodies\u003c\/b\u003e\u003cbr\u003eSeamless 7050 aluminum, type 3 hard anodized coating\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRebound\u003c\/b\u003e\u003cbr\u003eDual side high tensile steel spring, adjustable\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdjusters\u003c\/b\u003e\u003cbr\u003eExternal tool-free compression, rebound adjustment\u003cbr\u003e(rebound adjusted using tool)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSeals\u003c\/b\u003e\u003cbr\u003eNOK MX seals \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBushings\u003c\/b\u003e\u003cbr\u003eDaido MX bushings\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGuards\u003c\/b\u003e\u003cbr\u003eHigh impact PP, 210-degree wraparound\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0539\/3347\/3987\/files\/Still_2025-07-11_142314_1.75.1.jpg?v=1754062616\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Charged Powersports","offers":[{"title":"Medium (140 - 180 lb) \/ Standard Crown \/ black","offer_id":43711764562031,"sku":"430-99-014-MED-02","price":2250.0,"currency_code":"USD","in_stock":false},{"title":"Medium (140 - 180 lb) \/ Standard Crown \/ blue","offer_id":43711764594799,"sku":"430-99-014-MED-04","price":2250.0,"currency_code":"USD","in_stock":false},{"title":"Medium (140 - 180 lb) \/ Drop Crown \/ black","offer_id":43711764627567,"sku":"430-99-014-MED-02-DR","price":2350.0,"currency_code":"USD","in_stock":false},{"title":"Heavy (180 - 220 lb) \/ Standard Crown \/ black","offer_id":43711764660335,"sku":"430-99-014-HVY-02","price":2250.0,"currency_code":"USD","in_stock":false},{"title":"Heavy (180 - 220 lb) \/ Standard Crown \/ blue","offer_id":43711764693103,"sku":"430-99-014-HVY-04","price":2250.0,"currency_code":"USD","in_stock":false},{"title":"Heavy (180 - 220 lb) \/ Drop Crown \/ black","offer_id":43711764725871,"sku":"430-99-014-HVY-02-DR","price":2350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/sirris-f43-cmx-tune-front-fork-for-e-ride-pro-sr-3521976.webp?v=1760000974"},{"product_id":"kke-rear-shock-lbx-450","title":"KKE Upgraded Rear Suspension Shock Spring Absorber for Surron LBX 2019-2025","description":"\u003ch2\u003eKKE Upgraded Rear Shock Absorber for Surron LBX (Light Bee)\u003c\/h2\u003e\n\u003cp\u003eTake full control of your ride with the KKE 30mm rear shock absorber — engineered specifically for the Surron LBX. Built from aerospace-grade aluminum and precision-machined components, this shock delivers tunable, consistent damping whether you're hitting trails or pushing limits on technical terrain.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Mounting:\u003c\/strong\u003e AL6061-T6, black, full CNC precision machining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Speed Compression Adjuster:\u003c\/strong\u003e AL6061-T6, red, full CNC precision machining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Speed Compression Adjuster:\u003c\/strong\u003e AL6061-T6, gold, full CNC precision machining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Chamber:\u003c\/strong\u003e AL6061-T6, champagne gold, precision-drawn tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Fork:\u003c\/strong\u003e AL6061-T6, black, full CNC machining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock Nut:\u003c\/strong\u003e AL6061-T6, black, full CNC precision machining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Chamber:\u003c\/strong\u003e AL7075-T6, hard anodized, precision machining (honing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Guide Bushing:\u003c\/strong\u003e POM, black, oil cylinder protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston Rod:\u003c\/strong\u003e 40Cr, hard chrome plated — restorable via re-chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Spring:\u003c\/strong\u003e 55CrSi-C-G8, black, high-performance spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003e30mm large cylinder bore\u003c\/strong\u003e — wider damping range and more precise tuning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh \u0026amp; low-speed compression adjustment\u003c\/strong\u003e — dial in your ride for any terrain\u003c\/li\u003e\n\u003cli\u003eProfessionally calculated internal oil channels for maximum shock performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImported high-performance shock oil\u003c\/strong\u003e — stable damping with low temperature fade\u003c\/li\u003e\n\u003cli\u003eTuned by domestic and international suspension experts — extensively tested\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSurron LBX\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTalaria Sting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eE-Ride Pro\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Rear shock absorber assembled with 450 lb spring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eColor\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlack spring with bronze air chamber\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKE Racing","offers":[{"title":"Default Title","offer_id":53166853455983,"sku":"BA30CO1-0107","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/files\/kke-rear-shock-absorber-sur-ron-light-bee-x-2509577.jpg?v=1779988097"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/0918\/7695\/collections\/ext-ferro-e-mx-fork-surron-talaria-eride-pro-79-bike-segway-533823_2a9fa81d-147e-49e3-a255-b26f4ff8ed54.webp?v=1794424117","url":"https:\/\/titaniumsurron.com\/collections\/e-ride-pro-sr-forks-and-rear-shocks.oembed","provider":"Titanium Surron ","version":"1.0","type":"link"}