EXT Ferro Fork for Sur-Ron and Talaria: Fitment, Install Notes, and the 11 vs 17 Piece Titanium Bolt Kit
Share
Does the EXT Ferro fork fit a Sur-Ron or Talaria, and what titanium hardware should go on it? Yes. The EXT Ferro E-MX fork is listed with bike-specific options for the Sur-Ron LBX / Segway X260, Talaria MX3/MX4, Talaria XXX, E-Ride Pro, Ventus One, RAWRR Mantis, Zero and Rerode R1. Most of those fit directly once you add a boost rotor spacer. To finish the front end, add the Titanium EXT Ferro Fork Bolt Kit. It comes in 11 or 17 pieces, and the 17-piece kit adds the fork-plastic bolts.
Everything EXT we carry is in one place: the EXT collection. That covers Ferro forks, Arma MX dampers, the Ferro titanium bolt kits and the matching small parts.
EXT Ferro E-MX fork: the specs that matter for fitment
These figures come from the product listing:
- Dual-crown inverted (USD) MX design with 36 mm hard-chromed steel stanchions
- 205 mm of travel and 44 mm offset
- HS3 3-way positive air spring with a large self-balancing negative chamber
- 3-way cartridge damper: high-speed compression, low-speed compression and rebound are adjusted separately
- Ø20 mm twin hexagonal floating axle, boost hub spacing
- 200 mm post-mount brake
- Listed weight: 4,000 g
- Works with the stock fender
Fitment by bike: what to check before you order
- Sur-Ron LBX / Segway X260: Direct fit with a boost rotor spacer, all model years. The listing recommends a head tube reinforcement clamp on Sur-Ron builds older than the current model year.
- Talaria MX3 / MX4 and Talaria XXX: Direct fit with a boost rotor spacer. Choose your exact Talaria option on the product page.
- E-Ride Pro S / SS 2.0: Direct fit with a boost rotor spacer.
- E-Ride Pro SS 3.0 / SR: Needs the EXT brake adaptor, which comes with that option. The listing says it fits the SR, but the SR is not covered under warranty.
- Ventus One, RAWRR Mantis, Zero, Rerode R1: Each has its own option on the listing. Each is a direct fit with a boost rotor spacer.
Boost note: The Ferro uses boost hub spacing. If you keep a stock wheel, or any wheel not built for a boost hub, you need a rotor adaptor. The Front Wheel Boost Spacer is in the EXT collection.
Ordering note: EXT asks for your rider weight in the order notes so the fork can be set up for you.
11-piece vs 17-piece titanium EXT Ferro bolt kit
Both kits are made for the Ferro's bolt pattern. Both use certified Grade 5 titanium (6Al-4V) with rolled threads, and the listing rates them about 40% lighter than the OEM hardware they replace. Color options are Burnt Blue, Black, Gold, Green, Purple, Rainbow, Silver (raw), Teal and Blue. Every color comes in both kit sizes.
Choose 11 pieces if you want the core fork hardware in titanium and are keeping the stock fork-plastic screws for now.
Choose 17 pieces if you want the guards and plastics to match too. The 17-piece kit includes everything in the 11-piece kit plus 6 fork-plastic bolts, so no plated screw heads are left on the lowers. If you know you want the plastics done, buying the 17-piece kit once is simpler than adding plastic bolts later.
If you already have the 11-piece kit and want to match the axle area, the Titanium Axle Pinch Bolts for E-moto Forks have a dedicated EXT Ferro option.
Complete Kits: titanium bolt kit plus the Ferro kit in one order
On a Talaria with a Ferro up front, a Complete Kit covers the frame and the fork in one order. The Talaria MX3/MX4 Complete Kit (Titanium bolt kit + EXT Ferro) pairs the Grade 5 titanium bolt kit with the 17-piece Ferro fork kit. You pick the body kit color and the fork kit color separately. A matching Talaria XXX Complete Kit with EXT Ferro is also listed. For other bikes, start with the titanium bolt kit for your platform, then add the Ferro kit.
Torque and install rules that keep titanium fork bolts from snapping
Titanium going into aluminum fork castings is not a job to do by feel.
- Use a torque wrench on every fork fastener, and follow EXT's torque spec for each joint.
- Over-torquing is how riders snap titanium fork bolts. Stop when you reach the spec.
- Prep each joint for its job: anti-seize where galling is the risk, or medium threadlocker where the bolt must not back out. Never use both on the same bolt. Our guide to anti-seize or Loctite on titanium e-moto bolts covers which to use where.
- If a bolt binds before it reaches torque, back it out. Check the thread engagement and that you have the right bolt for that hole before you go further.
- Check the pinch bolts again after the first rides.
Not running an EXT Ferro?
Ferro hardware is made for the Ferro only. FastAce, RFloXa, KKE, Manitou, Sirris, Tech, RST and Fox 40 / Bomber 58 forks each have their own titanium kits in Titanium Hardware for E-moto Forks. To compare other suspension, browse Forks and Rear Shocks.
FAQ
Do I have to buy the 17-piece kit?
No. The 11-piece kit covers the core fork hardware. The 17-piece kit adds the 6 fork-plastic bolts for a complete titanium front end.
Will the Ferro kit fit a FastAce or RFloXa fork?
No. Each fork brand has a different bolt pattern. Use the kit made for your fork.
Can I run different colors on the frame and the fork?
Yes. The bolt kit is sold by color and piece count. The Talaria Complete Kits let you choose the body kit color and the fork kit color separately.
Does the Ferro fit a stock wheel?
Yes, with a rotor adaptor. The Ferro has boost hub spacing, so stock wheels and other non-boost wheels need a boost spacer.
Ready to build the front end?
Shop the EXT collection, or go straight to the Titanium EXT Ferro Fork Bolt Kits.