Titanium Brake Handle-Mount Bolts - E-Ride Pro 3.0

Grade 5 titanium brake handle-mount bolts for E-Ride Pro 3.0.

Kit choices: 1 Bolt per Clamp: Two Brakes includes 2 bolts; One Brake includes 1 bolt. 2 Bolts per Clamp: Two Brakes includes 4 bolts; One Brake includes 2 bolts. Count the bolts on your brake clamp before choosing.

Colors (9): Burnt Blue, Blue, Black, Gold, Green, Purple, Rainbow, Silver (raw), Teal.

• Anodized/ PVD coated to perfection
• Increased corrosion resistance
• Made from certified Titanium Grade 5 6AL-4V
• Rolled threads for greater fatigue strength
• Greater strength to weight ratio than steel
• 40% lighter in weight compared to OEM
• Exclusively sold at Titanium Surron and authorized retailers only

Fitment: E-Ride Pro 3.0

E-Ride Pro SS 3.0 & SR — stock brakes & clamp bolts

Both the E-Ride Pro SS 3.0 and SR use the same stock E-Ride Pro hydraulic brake platform. Dealers list Type 1 and Type 2 (also called V1/V2) assemblies, pads, hoses, and levers as fitting both models.

• Type 1: reservoir lid says “ERIDE PRO” (logo); typically associated with red pads / earlier calipers.
• Type 2 (LBN): reservoir lid says “DOT4 Only” with no E-Ride Pro logo; gold calipers/pads. Charged Cycle Works attributes Type 2 to LBN.

Both 3.0 and SR use DOT 4 fluid. The E-Ride Pro 2.0 uses mineral oil and a different (Non-DOT4) brake family — these fluids are not interchangeable.

Handlebar lever clamp (this kit):

• 2024 3.0 / SR — typically 1 bolt per clamp
• 2025 3.0 / SR — typically 2 bolts per clamp

Type 1 vs Type 2 is not proven to match the clamp bolt count. Before ordering, count the pinch bolts on your master-cylinder lever clamp (the band around the handlebar).

Brake-system ID notes courtesy of Charged Cycle Works.

Other versions: E-Ride Pro SR · 79-Bike Falcon · Altis Sigma · E-Ride Pro 2.0 · Rerode R1 · SRPNT · Surron Light Bee (LBX) / Segway X160/X260 · Talaria Sting MX3/X3 Pro/MX4/MX5 · Talaria X3 · Ventus One