The JR_Craftworks Talaria battery Brace is precisely designed to wedge between the battery and the locking mechanism to prevent forward and backward motion. Once the battery lid is closed, it is meant to limit battery movement from side to side.
FITMENT:
15mm
2023 - Current Talaria MX3 and R MX4 models that came with DNM, FASTACE, and FACTORY front suspension.
Fits most Sur-Ron bikes.
18mm
2023 - Current Talaria MX3 and R MX4 models that came with DNM, FASTACE, and FACTORY front suspension but may have been ridden for a while without a brace causing the stock battery rubber pads to wear thin.
25mm
2022 Talaria models that came with RST suspension.
MATERIAL:
TPU (Thermoplastic Polyurethane) to be more flexible and forgiving to the battery and cover.
NOTE:
Pressing down firmly on the battery lid may be needed to close and release latch when unlocking. This is not a design flaw but instead intended to assure a tight fit.
If battery lid does not close, The battery lid latch may be hitting the battery brace, Loosen the two bolts holding the battery lid latch and make sure the latch is shifted to the furthest position back towards the seat.
